Naslov
Nonlinear numerical model for seismic analysis

Autori
Mihanović, Ante ; Trogrlić, Boris ; Akmadžić, Vlaho

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
International Scientific Symposium MODELING OF STRUCUTRES - Proceedings / Čolak, Ivo - Mostar : Sveučilište u Mostaru ; DAAAM International Vienna, 2008, 417-430

Skup
International Scientific Symposium MODELING OF STRUCUTRES

Mjesto i datum
Mostar, Bosna i Hercegovina, 13.11.2008. - 15.11.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
material nonlinearity; geometrical nonlinearity; incremental procedure; equilibrium curve; target displacement; capacity curve

Sažetak
This paper presents a possible application of materially and geometrically nonlinear models on nonlinear static analysis of spatial frames according to EN EUROCODE 8. The main assumptions of a developed model are described in brief. The model very accurately constructs the equilibrium curve (pushover curve) as the basis for application of the static nonlinear analysis of seismic effect. In a simplified way, this paper presents the application of the method of target displacement as the basis for the method of bearing capacity and then also the method of bearing capacity itself. Cases of uniform and modal types of seismic loads were elaborated through examples. Attention was paid to values of displacements of the original mathematical model and their comparison with target displacements defined according to EN ECS. This model analyzed: (1) RC frames of various types and numbers of stories, (2) flexural walls, free-standing and connected with panels, and (3) walls with openings. The conclusion presents engineer's comment on the structural bearing of specific RC systems, with emphasis on the extent of expected deformations.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA