Naslov
Optimization of beech bed production process

Autori
Mihulja, Goran ; Basar, Tomislav ; Poljak, Dominik

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Wood is good - properties, technology, valorisation, application : proceedings of the 19th International scientific conference / Grbac, Ivica - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2008, 97-103

ISBN
978-953-292-004-8

Skup
Međunarodno znanstveno savjetovanje Drvo je prvo - svojstva, tehnologija, valorizacija, primjena (19 ; 2008)

Mjesto i datum
Zagreb, Hrvatska, 17.10.2008

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
metal angles; double thread nuts; beech wood; time saving; extraction strength

Sažetak
Beech bed assembly involves a process where double thread nuts are screwed into the bed sides and then the connecting metal angles are fixed to them by metric thread bolts. In the production process, however, a problem was identified, which the present work addresses by optimizing the technological process in order to save production time while at the same time upholding the product quality level. Tests have been conducted to determine optimum bore diameter for screwing down the nuts relative to the extraction strength and time interval needed for nut screwing. This has shortened the time of bed fabrication (nut screwing) and ensured optimum structural strength.

Izvorni jezik
Engleski

Znanstvena područja
Drvna tehnologija

POVEZANOST RADA