Naslov
Testing of Concrete Sewer Pipes

Autori
Rajab, Roden ; Rak, Mladenko ; Šimić, Diana ; Damjanović, Domagoj

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
25th Danubia-Adria Symposium on Advances in Experimental Mechanics : proceedings / Daniel, M. ; Holy, S. ; Ružička, M - Prag : Czech technical university in Prague, 2008, 219-220

ISBN
978-80-01-04162-8

Skup
Danubia-Adria Symposium on Advances in Experimental Mechanics (25 ; 2008)

Mjesto i datum
České Budějovice, Češka Republika; Český Krumlov, Češka Republika, 24.09.2008. - 27.09.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
experimental testing; displacement; strain; breaking load; FE numerical model

Sažetak
The materials and the production modes should meet special fabrication conditions. With regard to crown pressure strength and depending on the pipe’ s diameter the load volume per the pipe’ s length unit is prescribed. The 28 day old pipe should be able to resist that load. The sensors measuring radial displacements in two orthogonal directions on the basis for the D=500 pipe and on the basis of 300 mm for the D=300 mm pipe are on the 1, 2, 3, 4 measuring places. On the 5 and 6 measuring places are the sensors on the 50 mm basis for both pipes measuring relative strains in a circular direction.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA