Pregled bibliografske jedinice broj: 368895
Ponašanje boriranog čelika Č3840 u erozijsko-korozijskoj otopini NaCl
Ponašanje boriranog čelika Č3840 u erozijsko-korozijskoj otopini NaCl // Tehnicki Vjesnik, 6 (1999), 1-2; 3-7 (podatak o recenziji nije dostupan, izvorni znanstveni članak, znanstveni)
CROSBI ID: 368895 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Ponašanje boriranog čelika Č3840 u erozijsko-korozijskoj otopini NaCl
(Behaviour of boronised steel C3840 in erosion-corrosion solution of NaCl)
Autori
Aracic, Stjepan
Izvornik
Tehnicki Vjesnik (1330-3651) 6
(1999), 1-2;
3-7
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, izvorni znanstveni članak, znanstveni
Ključne riječi
čelik; boriranje; erozijskka korozija; otopina NaCl
(Steel; boronised; erosion-corrosion; solutionof NaCl)
Sažetak
The paper presents the experimental results obtained by investigating of boronised steel in an erosion suspension of the gaseous (hydrocarbon) condensate and quartz sand and in an erosion corrosion suspension of the acidic 5% NaCl and quartz sand. The boronised specimens were tested in an apparatus of our own production by being exposed to erosion by rotation i.e. to erosion corrosion. The rate of wear was controlled and the microstructure of the boronised steel metalographically analyzed. The comparison of the results obtained by investigating the normalized and boronised specimens leads to the conclusion that the boronised specimens were exposed to less wear in the testing medium. Therefore it is possible to use boronised steel in analogue fluids
Izvorni jezik
Hrvatski
Znanstvena područja
Strojarstvo
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus
Uključenost u ostale bibliografske baze podataka::
- INSPEC
