Pregled bibliografske jedinice broj: 36786
Stress Analysis of Thin-Rimmed Gears by Use of 3D Models
Stress Analysis of Thin-Rimmed Gears by Use of 3D Models // Proceedings of Second International Congress Mechanical Engineering Technologies `99 Machines and Equipment Maintenance Proceedings / Mihovski, M. (ur.).
Sofija: Scientific technical union of mechanical engineering Industry - 4.0, 1999. str. 26-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 36786 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Stress Analysis of Thin-Rimmed Gears by Use of 3D Models
Autori
Marunić, Gordana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of Second International Congress Mechanical Engineering Technologies `99 Machines and Equipment Maintenance Proceedings
/ Mihovski, M. - Sofija : Scientific technical union of mechanical engineering Industry - 4.0, 1999, 26-28
Skup
Second International Congress Mechanical Engineering Technologies `99
Mjesto i datum
Sofija, Bugarska, 16.09.1999. - 18.09.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
FEM; Spur Gear; Thin Rim
Sažetak
The field of involute spur gear stress investigation was extended by use of three-dimensional Finite Element Method models. The attention was devoted to the stress values at the loaded tooth fillets, as well as to the stress that occures at the bottoms (roots). The obtained values of the stresses were compared, considering various actual gear size, the rim thickness and the tooth facewidth. The results of three-dimensional numerical approach like two-dimensional ones, pointed to the possibility of the gear fatigue strength reduction.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
