Naslov
INFLUENCE OF THE UNCOATED PRINTING SUBSTRATES ON THE QUALITY OF THE MONOCHROMATIC DIGITAL PRINTING

Autori
Bauk, Stanko ; Majnarić, Igor ; Bolanča, Stanislav ; Golubović, Kristijan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
12th INTERNATIONAL CONFERENCE ON PRINTING, DESIGN AND GRAPHIC COMMUNICATIONS BLAŽ BAROMIĆ / Bolanča, Zdenka - Zagreb : University of Zagreb Faculty of Graphic Arts, University of Ljubljana Faculty of Natural Science and Engineering, Ogranak matice hrvatske Senj, Pulp and Paper Institute, Ljubljana, 2008, 41-45

ISBN
987-953-96020-9-1

Skup
Blaž Baromić 08, 12th International conference on printing, design and graphic communications

Mjesto i datum
Split, Hrvatska, 21.09.2008. - 24.09.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
uncoated papers; monochromatic digital printing; dot gain; reproduction quality

Sažetak
It has been analyzed in this paper how the different types of uncoated papers can influence the quality of the monochromatic screen reproduction. In experiment actual monocromatic digital printing technologies were used: electrophotography, ink jet, digital screen printing, digital offset printing. The analysis comprised determination of dot gain (X-rite DTP 41) and determination of deviations of printed screen elements (Personal IAS). The analysis showed that qualitative monochromatic impression was obtained on Xerox 250. From the tonal point of view, harmonized screen reproduction was achieved on paper adapted for digital printing process. The round screen elements did not print as the smallest ones. The results show that smallest printed screen elements were obtained by Xerox 250 (Δ dArc=45, 3 μ m, Δ dNav=46, 6 μ m, Δ dArc=61, 8 μ m), while greatest printed elements were obtained on Riso (Δ dArc=172, 4 μ m, Δ dNav=154, 4μ m, Δ dArc=148, 9 μ m).

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA