Naslov
Comparison of Cast Irons for Automotive Engine Thermo-mechanical Loaded Parts

Autori
Unkić, Faruk ; Glavaš, Zoran ; Terzić, Katarina

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Mednarodno 48. livarsko posvetovanje : Zbornik referatov = International 48th Foundry Conference : proceedings / - Ljubljana : Društvo livarjev Slovenije, 2008, 1-13

Skup
Mednarodno livarsko posvetovanje (48 ; 2008)

Mjesto i datum
Portorož, Slovenija, 10.09.2008. - 12.09.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Nije recenziran

Ključne riječi
cast irons ; elevated temperatures ; microstructure

Sažetak
The influence of elevated temperatures (550 °C and 850 °C) on microstructure and resistance to oxidation of gray iron quality EN-GJL-250 and ductile irons qualities: EN-GJS-400-18, EN-GJS- 500-7, EN-GJS-SiMo4-1 and EN-GJS-AXNiCr20-2 were analyzed in this paper. The highest resistance to oxidation and microstructure changes at 550 °C and 850 °C shows austenitic ductile iron quality EN-GJS-AXNiCr20-2, followed by ferritic ductile iron quality EN-GJS-SiMo4-1. During oxidation of those cast irons at elevated temperatures two oxide layers over the surface of samples were occurred. Outward layer is easy detachable and consists of iron oxide. Inward layer is tightly connected with metal matrix and prevents progression of oxidation to the samples inside. This oxide layer consists of Fe2SiO4 (fayalite) or complex oxides (Fe, Cr, Ni, Si, and O). Due to favorable high-temperatures properties, those materials are suitable for construction of thermo-mechanical loaded parts of automotive engine, such as turbocharger housings and exhaust manifolds. Ferritic ductile iron quality EN-GJS-400-18, pearlitic ductile iron quality EN-GJS-500-7 and pearlitic gray iron quality EN-GJL-250 did not show an adequate resistance to oxidation and microstructure changes at 550 °C and 850 °C.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

Napomena
ISSN 1318-9123

POVEZANOST RADA