Pregled bibliografske jedinice broj: 364654
Analytical and experimental analysis of seismic links in eccentrically braced steel frames
Analytical and experimental analysis of seismic links in eccentrically braced steel frames // EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures, Bolume B / Robert Ofner, et. al. (ur.).
Brisel: European Convention for Constructional Steelwork (ECCS), 2008. str. 1419-1424 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 364654 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analytical and experimental analysis of seismic links in eccentrically braced steel frames
Autori
Bulić, Mladen ; Čaušević, Mehmed ; Androić, Boris
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures, Bolume B
/ Robert Ofner, et. al. - Brisel : European Convention for Constructional Steelwork (ECCS), 2008, 1419-1424
ISBN
92-0147-000-90
Skup
EUROSTEEL 2008, 5th European Conference on Steel and Composite Structures
Mjesto i datum
Graz, Austrija, 03.09.2008. - 05.09.2008
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Seismic links; steel frames; ductility; reliability class; consequences class; seismic energy; Eurocode
Sažetak
Firstly this paper presents an analytical analysis and then an expetimental investigation conducted on four types of short seismic links. Those seismic links were chosen having the same cross section HEA100 and the same length, but with different number of stiffeners, i. e. with three couples of stiffeners, two, one and without any stiffener respectively. Results of analytical analysis served as a base for preparing the programme of experimental investigation. The experiments consisted of conducting four series each having four specimens of seismic links. One set of experiment was made on the full steel frame. Each of this set of experiment consist four specimens with different number of stiffeners. Remaining three sets of experiments (each having four specimens) were conducted with the auxiliary structures simulating boundary conditions for links in the real eccentrically braced steel frames. The comparison of three reliability classes RC1, RC2 and RC3 with the three consequences classes CC1, CC2 and CC3 has been done. To obtain the degree of reliability of eccentrically braced steel frame the reliability index was defined on the probabilistic level in relation to target value for the reliability classes RC1, RC2 and RC3 according to Eurocode. It has been shown that the optimum reliability index is gained for short seismic link with three pairs of web stiffeners.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
114-0821466-1470 - Razvoj konstrukcija povećane pouzdanosti obzirom na potrese (Čaušević, Mehmed, MZOS ) ( CroRIS)
Ustanove:
Građevinski fakultet, Zagreb,
Građevinski fakultet, Rijeka