Pregled bibliografske jedinice broj: 363759
Hard Turning of Bearing Raceway
Hard Turning of Bearing Raceway // Proceedings of 2nd International Maritime Scientific conference / Cebalo, Roko ; Kopač, Janez ; Bajić, Dražen (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2008. str. 257-262 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 363759 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Hard Turning of Bearing Raceway
Autori
Stoić, Antun ; Kopač, Janez ; Tadijanović, Adam ; Szabo Andras ; Samardžić, Ivan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 2nd International Maritime Scientific conference
/ Cebalo, Roko ; Kopač, Janez ; Bajić, Dražen - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2008, 257-262
ISBN
978-953-7599-02-7
Skup
International Maritime Scientific Conference (2 ; 2008)
Mjesto i datum
Lumbarda, Hrvatska, 17.06.2008. - 21.06.2008
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
hard turning; bearing raceways; ceramic tool; hot spot
Sažetak
Application of ceramic inserts in machining of large diameter ball bearing raceway surface, previously hardened (2 mm in depth on 56 +3 HRc), fulfils our expectances in bearing ring productivity increase. This finishing procedure is satisfactory in achieving demanded raceway quality and ensure machining time reduction. Quality is achieved even the hard turning process is disturbed with load impacts on cutting tool resulting from high hardness drop (750 to 200 HV) which appears at the start/finish position of induction hardening. Tests were performed on bearing rings produced of Ck45N which has to be mounted on a heavy duty machines (lifts, bulldozer, loader etc.) and exploited at low rotation speeds.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-0000000-3309 - Suvremene tehnike obrade rezanjem u proizvodnji prihvatljivoj okolišu (Stoić, Antun, MZOS ) ( CroRIS)
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Raos, Pero, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod
