Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 359328

Improving mixing length-scale for the stable boundary layer in mesoscale models


Grisogono, Branko; Belušić, Danijel
Improving mixing length-scale for the stable boundary layer in mesoscale models // 18th Symposium on Boundary Layers and Turbulence
Stockholm, Švedska, 2008. (poster, međunarodna recenzija, sažetak, znanstveni)


CROSBI ID: 359328 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Improving mixing length-scale for the stable boundary layer in mesoscale models

Autori
Grisogono, Branko ; Belušić, Danijel

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
18th Symposium on Boundary Layers and Turbulence / - , 2008

Skup
18th Symposium on Boundary Layers and Turbulence

Mjesto i datum
Stockholm, Švedska, 09.06.2008. - 13.06.2008

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
vertical diffusion; turbulence; parameterization; wind shear

Sažetak
It has been recognized that current numerical mesoscale models often represent the stable atmospheric boundary layer (SABL) poorly in terms of the SABL depth, near-surface inversion characteristics, low-level wind profiles and overall mixing properties. Namely, the models usually yield either too strong vertical diffusion, or lead to a so-called frictional decoupling. We use Prandtl model to deduce an improved mixing length-scale in a mesoscale model with a higher-order turbulence parameterization scheme (MIUU model). A thin SABL flow develops against calm stratified background atmosphere laying over a slightly inclined cooled surface ; this is equivalent to a simple katabatic flow. We forced MIUU model to reproduce the solution similar to that from the Prandtl model. In this way, we determine one of the coefficients in the mixing length-scale for stable "z-less" conditions, L = min[2a(TKE)^(1/2)/N, a(TKE)^(1/2)/S] where N and S are buoyancy frequency and absolute vertical wind shear and 2a = 0.537 is a standard coefficient in this model. Under weakly to moderately stable conditions, 0 < Ri &#8804; 1, this new L, now including the wind shear explicitly (2nd term), is smaller than in the original MIUU formulation (1st term only, proportional to Ozmidov length). Without this inclusion, MIUU model gave too strong vertical mixing with an elevated inversion and low-level jet around 150&#8211; 200 m instead of around 20 m.

Izvorni jezik
Engleski

Znanstvena područja
Geologija



POVEZANOST RADA


Projekti:
119-1193086-1311 - Bazične ORografske Atmosferske cirkulacije u Hrvatskoj (BORA) (Grisogono, Branko, MZOS ) ( CroRIS)
119-1193086-1323 - Kakvoća zraka nad kompleksnom topografijom (Bencetić-Klaić, Zvjezdana, MZOS ) ( CroRIS)

Ustanove:
Prirodoslovno-matematički fakultet, Zagreb

Profili:

Avatar Url Danijel Belušić (autor)

Avatar Url Branko Grisogono (autor)

Citiraj ovu publikaciju:

Grisogono, Branko; Belušić, Danijel
Improving mixing length-scale for the stable boundary layer in mesoscale models // 18th Symposium on Boundary Layers and Turbulence
Stockholm, Švedska, 2008. (poster, međunarodna recenzija, sažetak, znanstveni)
Grisogono, B. & Belušić, D. (2008) Improving mixing length-scale for the stable boundary layer in mesoscale models. U: 18th Symposium on Boundary Layers and Turbulence.
@article{article, author = {Grisogono, Branko and Belu\v{s}i\'{c}, Danijel}, year = {2008}, keywords = {vertical diffusion, turbulence, parameterization, wind shear}, title = {Improving mixing length-scale for the stable boundary layer in mesoscale models}, keyword = {vertical diffusion, turbulence, parameterization, wind shear}, publisherplace = {Stockholm, \v{S}vedska} }
@article{article, author = {Grisogono, Branko and Belu\v{s}i\'{c}, Danijel}, year = {2008}, keywords = {vertical diffusion, turbulence, parameterization, wind shear}, title = {Improving mixing length-scale for the stable boundary layer in mesoscale models}, keyword = {vertical diffusion, turbulence, parameterization, wind shear}, publisherplace = {Stockholm, \v{S}vedska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font