Naslov
Testing the Impact of Hydrodesulphurisation Process Parameters on Diesel Fuel Properties

Autori
Fabulić Ruszkowski, Maja ; Radošević, Marko ; Bolf, Nenad ; Ivandić, Marina

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Proceedings the 35th International Conference of Slovak Society of Chemical Engineering / Markoš, Jozef - Bratislava : Slovak Society of Chemical Engineering, 2008, 1-1

ISBN
978-80-227-2903-1

Skup
International Conference of Slovak Society of Chemical Engineering (35 ; 2008)

Mjesto i datum
Tatranské Matliare, Slovačka, 26.05.2008. - 30.05.2008

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
diesel fuel ; hydrodesulphurization process ; process monitoring ; process control

Sažetak
In this paper the influence of changes in hydrodesulphurisation (HDS) process parameters (space velocity and temperature) on efficiency of sulphur compounds removal was tested. The feedstock, straight run gas oils (STGO) from Croatian crude oil used for diesel fuel production have been subject to the hydrodesulphurisation process with Co-Mo/Al2O3 commercial catalyst in a trickle bed reactor in high-pressure apparatus at the following conditions: total reactor pressure of 500 kPa, reactor inlet temperature in the range 330 - 355 °C, liquid hourly space velocity (LHSV) in the range 2.0, 2.5 and 3.0 h-1 and hydrogen/hydrocarbons ratio of 120. The laboratory high-pressure apparatus was upgraded by implementation of a modern computer-based control system. Control system supports experimentation aiming better process conditions monitoring and control with the purpose of improved repeatability and achievement of safe operation.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

Napomena
In this work it the influence of changes in hydrodesulphurisation (HDS) process parameters (space velocity and temperature) on efficiency of sulphur compounds removal was tested. The l feedstock, straight run gas oils (STGO) from Croatian crude oil used for diesel fuel production have been subject to the hydrodesulphurisation process with Co-Mo/Al2O3 commercial catalyst in a trickle bed reactor in high-pressure apparatus at the following conditions: total reactor pressure of 500 kPa, reactor inlet temperature in the range 330 - 355 °C, liquid hourly space velocity (LHSV) in the range 2.0, 2.5 and 3.0 h-1 and hydrogen/hydrocarbons ratio of 120. The laboratory high-pressure apparatus was upgraded by implementation of a modern computer-based control system. Control system supports experimentation aiming better process conditions monitoring and control with the purpose of improved repeatability and achievement of safe operation.

POVEZANOST RADA