Pregled bibliografske jedinice broj: 358351
Machining Magnesium Alloys with Use of Oil-Water Based Emulsions
Machining Magnesium Alloys with Use of Oil-Water Based Emulsions // Tribologie 2000 : 8. internationales Kolloquium, 14.-16. Januar 1992 / Technische Akademie Esslingen ; Herausgeber: Wilfried J. Bartz / Wilfried, J. Bartz (ur.).
Esslingen: Technische Akademie Esslingen (TAE), 1992. str. 18.7-1
CROSBI ID: 358351 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Machining Magnesium Alloys with Use of Oil-Water Based Emulsions
Autori
Tonnessen, Kjell ; Tomac, Nikola, Rasch, Finn Ola
Vrsta, podvrsta i kategorija rada
Poglavlja u knjigama, znanstveni
Knjiga
Tribologie 2000 : 8. internationales Kolloquium, 14.-16. Januar 1992 / Technische Akademie Esslingen ; Herausgeber: Wilfried J. Bartz
Urednik/ci
Wilfried, J. Bartz
Izdavač
Technische Akademie Esslingen (TAE)
Grad
Esslingen
Godina
1992
Raspon stranica
18.7-1
ISBN
3-924813-28-0
Ključne riječi
Machining, Magnesium, Oil-Water Based Emulsions
Sažetak
In dry machining of of magnesium the material build-up on the flank surfaces of cutting tools (flank build-up, FBU) may exhibit an important restriction in raising the cutting speed. With the use of water based emulsions the FBU was completely eleiminated within the examined cutting speed range. When magnesim comes in contact with water hydrogen gas will be developed which is flammable and explosive in mixture eith air. For that reason the water based emulsions are not recommended in machining of magnesium alloys. This investigation show that only small quantities of hydrogen are generated in the cutting process and that hydrogen can be easily removed from the machine tool and actual surroundings.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
