Pregled bibliografske jedinice broj: 358177
The Use of Water Based Cutting Fluids in Machining of Magnesium Alloy
The Use of Water Based Cutting Fluids in Machining of Magnesium Alloy // Proceedings of International Conference on Innovate Metal Cutting Processes and Materials ICIM'91,
Torino, 1991. str. 105-113 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 358177 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Use of Water Based Cutting Fluids in Machining of Magnesium Alloy
Autori
Tomac, Nikola ; Tø ; nnessen, Kjell ; Rasch, Finn Ola
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of International Conference on Innovate Metal Cutting Processes and Materials ICIM'91,
/ - Torino, 1991, 105-113
Skup
Innovate Metal Cutting Processes and Materials ICIM'91,
Mjesto i datum
Torino, Italija, 2‑ 4. 10. 1991
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Cutting; Magnesium; Build-up
Sažetak
When magnesim comes in contact with water hydrogen gas will be developed which is flammable and explosive in mixture eith air. For that reason the water based cutting fluids are not recommended in machining of magnesium alloys. This investigation show that only small quantities of hydrogen are generated in the cutting process and that hydrogen can be easily removed from the machine tool and actual surroundings.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
