Naslov
Analysis of abrasive wear resistance of the d2 tool steel in relation to heat treatment

Autori
Goršćak, Đurđica ; Filetin, Tomislav ; Grilec, K. ; Godec, M. ; Kapudija, D.

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, prošireni sažetak, znanstveni

Izvornik
2nd International conference on the heat treatment and surface engineering of tools and dies : extended abstracts / Leskovšek, Vojteh ; Smoljan, Božo ; Jager, Heimo ; Jenko, Monika - Ljubljana : Inštitut za kovinske materiale in tehnologije, 2008, 131-132

Skup
2nd International conference on the heat treatment and surface engineering of tools and dies

Mjesto i datum
Bled, Slovenija, 25.05.2008. - 28.05.2008

Vrsta sudjelovanja
Plenarno

Vrsta recenzije
Podatak o recenziji nije dostupan

Ključne riječi
D2 tool steel ; heat treatment ; abrasive wear resistance

Sažetak
Heat treatment significantly influences wear resistance of the tool steels. D2 is suitable for the cutting and forming cold work tools. Heat treatment of the parts must be in accordance with the function of the tool positions. When high austenitized, it is suitable for application of PVD coatings which further enhance its operating characteristics. This article refers to relationship between the hardened-and-tempered condition of this tool steel and its abrasive wear resistance. The samples were subjected to the different heat treatment parameters, then were tested using dry sand and rubber wheel method. Microstructural analysis of the representative samples is presented and related to the obtained results of the dry sand/rubber wheel test.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA