Pregled bibliografske jedinice broj: 35030
Application of the Vibration Signal in the Feedback System for the Milling Machines
Application of the Vibration Signal in the Feedback System for the Milling Machines // CIM '99 Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Opatija: Hrvatska udruga proizvodnog strojarstva (HUPS), 1999. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 35030 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Application of the Vibration Signal in the Feedback System for the Milling Machines
Autori
Hnatko, Emil ; Majdandžić, Niko ; Raos, Pero
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
CIM '99 Computer Integrated Manufacturing and High Speed Machining
/ Cebalo, Roko ; Schulz, Herbert - Opatija : Hrvatska udruga proizvodnog strojarstva (HUPS), 1999
Skup
5. International Scientific Conference on Production Engineering CIM '99
Mjesto i datum
Opatija, Hrvatska, 17.06.1999. - 18.06.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
vibration signal; depth-of-cut; milling machine; feedback system
Sažetak
There is a positive co-relation between the strength of the vibration signal and the depth of the drilling. The Research paper examines the relation between the vibration signal of the diagnostic apparatus DI-1100 and the depth-of-cut at which the milling machines is operating. from the relation, the feedback signal is defined through the diagnostic sensor, and is used to control the depth of the cut. on the basis of the impulsion transfer function for the milling machine with the lead controller, feedback model for the milling machine has been worked out.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Strojarski fakultet, Slavonski Brod
