Pregled bibliografske jedinice broj: 349333
Desig of fastenings based on the fracture mechanics
Desig of fastenings based on the fracture mechanics // 11th International Conference on Fracture / Carpinteri A. (ur.).
Torino: Politechnico Torino, 2005. str. 20-25 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 349333 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Desig of fastenings based on the fracture mechanics
Autori
Eligehausen, Rolf ; Ožbolt, Joško
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
11th International Conference on Fracture
/ Carpinteri A. - Torino : Politechnico Torino, 2005, 20-25
Skup
11th International Conference on Fracture
Mjesto i datum
Torino, Italija, 20.03.2005. - 25.03.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Concrete; Fracture mechanics; Finite elements; Design
Sažetak
In the present paper the concrete cone failure mode is reviewed. Considered are headed stud anchors loaded by tensile load (pull-out) and by shear load against an edge of a concrete member. The influence of the material and geometrical parameters on the failure load and the size effect are discussed. The numerical and experimental studies confirm that fracture mechanics governs concrete break out failure. Consequently, there is a strong size effect on the nominal concrete cone strength that can be well described by a design formula that is based on linear elastic fracture mechanics.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
