Pregled bibliografske jedinice broj: 347375
Analysis of material transfer by rollers
Analysis of material transfer by rollers // Proceedings of the seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008 / Horváth, Imre ; Rusák, Zoltán (ur.).
Delft: Faculty of Industrial Design Engineering, Delft University of Technology, 2008. str. 1791-1794 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 347375 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of material transfer by rollers
Autori
Karabegović, Isak ; Ujević, Darko ; Hodžić, Damir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
Proceedings of the seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008
/ Horváth, Imre ; Rusák, Zoltán - Delft : Faculty of Industrial Design Engineering, Delft University of Technology, 2008, 1791-1794
ISBN
978-90-5155-044-3
Skup
Seventh International Symposium on Tools and Methods of Competitive Engineering - TMCE 2008
Mjesto i datum
İzmir, Turska, 21.04.2008. - 25.04.2008
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
transfer; material; rollers; sewing process
Sažetak
In the material sewing process always occurs problems in the material transfer whether the transfer is made by footsteps or rollers. In this paper there has been analyzed in details material transfer by rollers with same diameter and case when both rollers are driving rollers and the case in which only one roller is driving-roller. There are analyzed conditions in which material transfer by rollers is possible. Also there are analyzed forces which are required to enable material transfer.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
117-1171879-1887 - Antropometrijska mjerenja i prilagodba sustava veličina odjeće (Ujević, Darko, MZOS ) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
