Pregled bibliografske jedinice broj: 341900
The Influence of Material Combination on Contact stresses in Cylinder Rolling Bearing
The Influence of Material Combination on Contact stresses in Cylinder Rolling Bearing // Annals of DAAAM for 2006 & Proccedings of the 17th International DAAAM Symposium "Inteligent Manufacturing & Automation:Focus on Mechatronics and Robotics" / Branko Katalinić (ur.).
Beč: DAAAM International Vienna, 2006. str. 353-354 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 341900 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Influence of Material Combination on Contact stresses in Cylinder Rolling Bearing
(He Influence of Material Combination on Contact stresses in Cylinder Rolling Bearing)
Autori
Rubeša, Josipa ; Siminiati, Dubravka
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Annals of DAAAM for 2006 & Proccedings of the 17th International DAAAM Symposium "Inteligent Manufacturing & Automation:Focus on Mechatronics and Robotics"
/ Branko Katalinić - Beč : DAAAM International Vienna, 2006, 353-354
ISBN
3-901509-57-7
Skup
17 th International DAAAM Symposium "Inteligent Manufacturing & Automation:Focus on Mechatronics and Robotics"
Mjesto i datum
Beč, Austrija, 08.11.2006. - 11.11.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
contact stress; mesh; bearing; FEM
Sažetak
The influence of material combination on contact stresses in cylinder rolling bearings has been analysed in this paper. Both concave-convex and concave-concave contact of inner and outer races with the cylinder was simplified as cylinder-planar surface contact. A short review of commonly used material combinations is given, followed by FEM model description, and obtained contact stress analysis results. The four different values of load have been applied at cylinder-plate contact model.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
