Pregled bibliografske jedinice broj: 341554
Mesh Density Influence on Contact Stress Analysis Using FEM Software
Mesh Density Influence on Contact Stress Analysis Using FEM Software // 4th International Conference on Computer Aided Design and Manufacturing CADAM 2006, Proccedings / Boris Obsieger (ur.).
Rijeka: Zigo, 2006. str. 81-82 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 341554 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Mesh Density Influence on Contact Stress Analysis Using FEM Software
Autori
Rubeša, Josipa ; Siminiati, Dubravka
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
4th International Conference on Computer Aided Design and Manufacturing CADAM 2006, Proccedings
/ Boris Obsieger - Rijeka : Zigo, 2006, 81-82
ISBN
953-7142-19-1
Skup
4th International Conference on Computer Aided Design and Manufacturing CADAM 2006
Mjesto i datum
Supetar, Hrvatska, 19.09.2006. - 23.09.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
contact stress; mesh; software
Sažetak
Conventional contact stress analysis is done analitically or by using computer programs written for specific problems. Modern analysis of such mechanical systems are mainly done numerically using commercial software packages such as MSC.Nastran/Patran, MSC.Marc, Ansys, I-DEAS and others. Whether the analysis is linear or nonlinear, static or dynamic etc., the accuracy of obtained results, analysis time and needed hardware resources mainly depends on the chosen finite element model and specifically used mash density. In order to achieve the optimal analysis results, for both normal and shear stresses the mesh density must by carefully chosen.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
