Pregled bibliografske jedinice broj: 338826
Reconstruction of existing livestock feed production plants by adding a hydraulic adder
Reconstruction of existing livestock feed production plants by adding a hydraulic adder // Poljoprivreda (Osijek), 13 (2007), 1; 218-221 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 338826 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Reconstruction of existing livestock feed
production plants by adding a hydraulic adder
Autori
Kiš, Darko ; Jurić, Tomislav ; Voća, Neven ; Ćurić, Duška ; Mandurić, Mario
Izvornik
Poljoprivreda (Osijek) (1330-7142) 13
(2007), 1;
218-221
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
adders ; hydraulic adder ; recipes ; feed mixtures ; livestock feed factory
Sažetak
Recipes determine the quality of livestock feed and the hydraulic adders are one of the elements determining if the given recipe will be carried out. Generally, construction of existing adders does not allow accomplishment of that aim i.e. they do not satisfy recipe requirements. Consequently, researches were conducted which determined deviations in ingredient adding present with existing adders and with the experimental hydraulic adder. The research was conducted for two years (2005 and 2006) in two livestock feed factories in the Republic of Croatia on samples of feed mixtures for pigs weighing up to 15 and 25 kilos. Relative error was the means for comparison of weighing deviations between the hydraulic adder and the adders powered by means of an electric motor. Research results indicate that none of the two observed livestock feed production plants in 30 repetitions for two kinds of feed mixture showed a feed mixture weighing that would correspond to the specifications in the recipe. Additionally, hydraulic adders showed a greater precision in adding fish meal, extruded soybean and soybean meal when compared with the adders powered by means of an electric motor. However, the adders powered by means of an electric motor exhibited a greater precision in adding corn. Based on the research results it can be concluded that using hydraulic adders in place of the adders powered by means of an electric motor will result in more accuracy in dosing ingredients with fine and middle granularity, whereas this can not be applied to dosing coarse grained ingredients.
Izvorni jezik
Engleski
Znanstvena područja
Poljoprivreda (agronomija)
POVEZANOST RADA
Projekti:
MZOS-079-0792067-2071 - Efektivnost tehničkih sustava i očuvanje okoliša (Jurić, Tomislav, MZOS ) ( CroRIS)
Ustanove:
Fakultet agrobiotehničkih znanosti Osijek
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
- Scopus
Uključenost u ostale bibliografske baze podataka::
- AGRICOLA
- CAB Abstracts