Pregled bibliografske jedinice broj: 331032
Cost Evaluation of Shell and Compact Models in 3D Printing
Cost Evaluation of Shell and Compact Models in 3D Printing // Výrobné Inžinierstvo - Manufacturing Engineering, 7 (2008), 3; 27-29 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 331032 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Cost Evaluation of Shell and Compact Models in 3D Printing
Autori
Galeta, Tomislav ; Kljajin, Milan ; Karakašić, Mirko
Izvornik
Výrobné Inžinierstvo - Manufacturing Engineering (1335-7972) 7
(2008), 3;
27-29
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
3D printing; cost calculation; rapid prototyping
Sažetak
Compact models printed on 3D printer capture a significant amount of passive building powder. This can be avoided if models are designed as shells in cases where it is acceptable. In this paper performed a cost evaluation of compact versus shell models regarding 3D printing process. It showed that shell models lower the printing costs only if models are infiltrated by wax. For all other infiltrants, there is no significant difference between shell and compact models. Furthermore, shell models are somewhat costlier than the compact models, especially as the base size is increasing.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-1521473-3111 - Značajke proizvoda za sveukupnu realizaciju proizvoda kod brze proizvodnje (Kljajin, Milan, MZOS ) ( CroRIS)
152-1521781-2235 - Razvoj ERP sustava za digitalno poduzeće (Šarić, Tomislav, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- Cambridge Scientific Abstracts
- Mechanical & Transportation Engineering Abstracts
