Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 306044

Power requirements during planing and surface quality of planed elements

Beljo Lučić, Ružica; Čavlović, Ankica; Ištvanić, Josip; Đukić, Igor; Mihulja, Goran
Power requirements during planing and surface quality of planed elements // Proceedings of the 2nd International Scientific Conference Woodworking Techniques / Goglia, Vlado ; Barcik, Štefan (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007. str. 215-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

CROSBI ID: 306044 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Power requirements during planing and surface quality of planed elements

Autori
Beljo Lučić, Ružica ; Čavlović, Ankica ; Ištvanić, Josip ; Đukić, Igor ; Mihulja, Goran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 2nd International Scientific Conference Woodworking Techniques / Goglia, Vlado ; Barcik, Štefan - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007, 215-220

ISBN
953-6307-94-4

Skup
International Scientific Conference (2 ; 2007)

Mjesto i datum
Zalesina, Hrvatska, 11.09.2007. - 15.09.2007

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
walnut-wood; cherry-wood; horse chestnut-wood; planing; power requirements; surface quality

Sažetak
This paper presents the results of research on power requirements, noise emission and surface quality during planing of solid walnut-wood (Juglans regia L.), cherry-wood (Prunus avium L.) and horse chestnut-wood (Castanea sativa Mill.). The variables concerned were: feed rate, cutting depth and cutting directions with regard to grain directions. The cutting speed and tool parameters were constant. Cutting power reaches higher values during planing with grater feed speed and greater cutting depth. Results have shown that the power requirements are lower when planing radial board than tangential and semi-radial boards, especially when the cutting depth is greater. The level of noise emission could be expressed in dependence on power requirements. The best surface quality is measured with cherry-wood planed elements. There are no significant changes in surface quality under the influence of cutting depth and different feed speed in the experiment.

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo



POVEZANOST RADA

Projekti:
022-0222411-2410 - Alergotoksični učinci čimbenika općeg i radnog okoliša (Macan, Jelena, MZOS ) ( CroRIS)
068-0680720-0710 - Novi materijali, tehnološki procesi i proizvodi u finalnoj obradi drva (Bogner, Andrija, MZOS ) ( CroRIS)
068-0682094-2095 - Optimiranje energijskih i ergonomskih čimbenika mehaničke obrade drva (Ozana Čavlović, Anka, MZOS ) ( CroRIS)

Ustanove:
Fakultet šumarstva i drvne tehnologije

Profili:

Avatar Url Goran Mihulja (autor)

Avatar Url Anka Ozana Čavlović (autor)

Avatar Url Ružica Beljo-Lučić (autor)

Avatar Url Josip Ištvanić (autor)

Avatar Url Igor Đukić (autor)

Citiraj ovu publikaciju:

Beljo Lučić, Ružica; Čavlović, Ankica; Ištvanić, Josip; Đukić, Igor; Mihulja, Goran
Power requirements during planing and surface quality of planed elements // Proceedings of the 2nd International Scientific Conference Woodworking Techniques / Goglia, Vlado ; Barcik, Štefan (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007. str. 215-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Beljo Lučić, R., Čavlović, A., Ištvanić, J., Đukić, I. & Mihulja, G. (2007) Power requirements during planing and surface quality of planed elements. U: Goglia, V. & Barcik, Š. (ur.)Proceedings of the 2nd International Scientific Conference Woodworking Techniques.
@article{article, author = {Beljo Lu\v{c}i\'{c}, Ru\v{z}ica and \v{C}avlovi\'{c}, Ankica and I\v{s}tvani\'{c}, Josip and \DJuki\'{c}, Igor and Mihulja, Goran}, year = {2007}, pages = {215-220}, keywords = {walnut-wood, cherry-wood, horse chestnut-wood, planing, power requirements, surface quality}, isbn = {953-6307-94-4}, title = {Power requirements during planing and surface quality of planed elements}, keyword = {walnut-wood, cherry-wood, horse chestnut-wood, planing, power requirements, surface quality}, publisher = {Fakultet strojarstva i brodogradnje Sveu\v{c}ili\v{s}ta u Zagrebu}, publisherplace = {Zalesina, Hrvatska} }
@article{article, author = {Beljo Lu\v{c}i\'{c}, Ru\v{z}ica and \v{C}avlovi\'{c}, Ankica and I\v{s}tvani\'{c}, Josip and \DJuki\'{c}, Igor and Mihulja, Goran}, year = {2007}, pages = {215-220}, keywords = {walnut-wood, cherry-wood, horse chestnut-wood, planing, power requirements, surface quality}, isbn = {953-6307-94-4}, title = {Power requirements during planing and surface quality of planed elements}, keyword = {walnut-wood, cherry-wood, horse chestnut-wood, planing, power requirements, surface quality}, publisher = {Fakultet strojarstva i brodogradnje Sveu\v{c}ili\v{s}ta u Zagrebu}, publisherplace = {Zalesina, Hrvatska} }

Podijeli:





Contrast
Increase Font
Decrease Font
Dyslexic Font
CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.