Pregled bibliografske jedinice broj: 306041
Granulometric analysis of chips generated from planing of different species of wood
Granulometric analysis of chips generated from planing of different species of wood // Woodworking techniques / Goglia, Vlado ; Barcik, Štefan (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007. str. 207-213 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 306041 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Granulometric analysis of chips generated from planing of different species of wood
Autori
Beljo Lučić, Ružica ; Čavlović, Ankica ; Ištvanić Josip ; Đukić, Igor ; Kovačević, Dalibor
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Woodworking techniques
/ Goglia, Vlado ; Barcik, Štefan - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2007, 207-213
ISBN
953-6307-94-4
Skup
2nd International Scientific Conference „ Woodworking Techniques 2007“
Mjesto i datum
Zalesina, Hrvatska, 11.09.2007. - 15.09.2007
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
kestenovina; orahovina; trešnjevina; blanjanje; distribucija veličine čestica
(walnut-wood; cherry-wood; horse chestnut-wood; planing; particle size distribution)
Sažetak
The objective of this paper was to investigate the influence of feed speed, cutting depths and wood characteristics on particle size distribution of chips generated in planing of solid walnut-wood (Juglans regia L.), cherry-wood (Prunus avium L.) and horse chestnut-wood (Castanea sativa Mill.). Granulometric analysis of chips generated in planing of radial, semi-radial and tangential boards at two different feed speeds (vf1= 6 m/min and vf2 = 12 m/min) and two cutting depths (h1= 2 mm and h2 = 5 mm) is presented. The results showed that the biggest share of chips is made of particles from 2 to 8 millimetres. The sample of chipped wood generated in planing of chestnut wood is mostly made of particles up to 4 mm, while in planing of walnut and cherry wood under the same conditions the generated particles are usually larger than 4 mm. The increase of feed speed affects the increase of share of larger particles and decrease of share of small fractions. Difference in cutting depth has no considerable influence on particle size/distribution of chips.
Izvorni jezik
Engleski
Znanstvena područja
Šumarstvo
Napomena
Čavlović Ankica se u bibl. bazi vodi još pod imenom Ankica Kos (237132)
POVEZANOST RADA
Projekti:
068-0682094-2095 - Optimiranje energijskih i ergonomskih čimbenika mehaničke obrade drva (Ozana Čavlović, Anka, MZOS ) ( CroRIS)
Ustanove:
Fakultet šumarstva i drvne tehnologije
Profili:
Anka Ozana Čavlović
(autor)
Ružica Beljo-Lučić
(autor)
Josip Ištvanić
(autor)
Igor Đukić
(autor)