Naslov
Form Factor Determination of the Full, Large Breadth and Shallow Draught Ship Series

Autori
Degiuli, Nastia ; Hadžić, Neven ; Pedišić Buča, Marta ; Semijalac, Gordana

Izvornik
Brodogradnja (0007-215X) 58 (2007), 4; 380-388

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
form factor; Prohaska’s method; total resistance; viscous resistance; wave resistance

Sažetak
By using the traditional approach, the total resistance can be broken down into Froude and Reynolds number dependent components. These are then scaled according to their respective scaling laws. The common practical method of separating the resistance components is by the use of a form factor to estimate the total viscous component. This paper presents the form factor determination of the full ships with large breadth and shallow draught for full load and ballast conditions using Prohaska’ s method. Form factors have been determined from the results of resistance tests carried out in Brodarski institute with ship models of the Jelsa series. Since full ships with block coefficients CB>0.8 are concerned, higher powers of the Froude number, n=4-6, have been used in the expression for the wave resistance. Obtained values for the total resistance have been compared with measured ones. It has been shown that all three powers give satisfactory agreement of results.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja

POVEZANOST RADA