Pregled bibliografske jedinice broj: 304971
Vortex Drop Shaft on Hydro Power Plant Ombla
Vortex Drop Shaft on Hydro Power Plant Ombla // Proceedings on CD of the 10th International Symposium on Water Mangement and Hydraulic Engineering / Petraš, Josip (ur.).
Zagreb: Građevinski fakultet Sveučilišta u Zagrebu, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 304971 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Vortex Drop Shaft on Hydro Power Plant Ombla
Autori
Gjetvaj, Goran ; Lončar, Goran ; Andročec, Vladimir ; Bijelić, Ivan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings on CD of the 10th International Symposium on Water Mangement and Hydraulic Engineering
/ Petraš, Josip - Zagreb : Građevinski fakultet Sveučilišta u Zagrebu, 2007
ISBN
978-953-6272-21-1
Skup
International Symposium on Water Management and Hydraulic Engineering (10 ; 2007)
Mjesto i datum
Šibenik, Hrvatska, 04.09.2007. - 09.09.2007
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
vortex drop shaft; hydraulic model; hydro power plant
Sažetak
In order to satisfy the increased demand for electric power in the Republic of Croatia, the construction of hydro power plant (HPP) Ombla is being planned. The specific feature of the hydro-power plant design is that dam, storage reservoir, evacuation units and turbine hall are placed in the rock, that is below land surface. As a consequence of such plant disposition some technical solutions not typical in engineering practice have occurred. On the upstream side of the dam forming a storage reservoir is a collector on top of which a spillway with capacity of Q = 120 m3/s needed for evacuating high waters, is anticipated. From the collector water is spilling over the weir in the spillway ending with a vortex chamber. In order to conceive the flow of water for the adopted form and dimensions of particular spillway elements a hydraulic scale model was constructed. On the model, the water level on weir, velocity and depth in spillway and vortex chamber capacity was measured. Special attention was made on measurements in spillway and vortex chamber aimed at achieving even spiral introduction of water into vertical pit with the existence of air nucleus and satisfying the set condition of flow rate. In the paper, the laboratory studies of the spillway and the vortex chamber were described.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
Napomena
Sažetak rada je na str. 53 objavljen u 'Book of abstracts' s navedenog skupa ; ISBN 978-953-6272-22-8.
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb