Pregled bibliografske jedinice broj: 30133
Determining the Nominal Function of the Active Analog RC Filter
Determining the Nominal Function of the Active Analog RC Filter // Proceedings of the SoftCOM'98 / Rožić, Nikola ; Begušić, Dinko ; Pavelin, Ivan ; Burmaz, Branimir (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 1998. str. 619 - 626 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 30133 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Determining the Nominal Function of the Active Analog RC Filter
Autori
Zulim, Ivan ; Biličić, Luki ; Zanchi, Igor
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the SoftCOM'98
/ Rožić, Nikola ; Begušić, Dinko ; Pavelin, Ivan ; Burmaz, Branimir - Split : Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 1998, 619 - 626
Skup
14. International Conference on Software in Communications and Computer Networks SoftCOM'98
Mjesto i datum
Bari, Italija; Dubrovnik, Hrvatska; Split, Hrvatska, 14.09.1998. - 17.09.1998
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Active RC filters; nominal function
Sažetak
A procedure of the determining of the nominal transfer function of the cascade active RC filter has been proposed. The procedure comprises the deviation of the passive elements predicting the influence on the filter response deviation, the influence of the lowering of the maximum in-band attenuation allowed in the pass-band on the deviation of the edge frequency of the filter pss-band. The filter response realized on the basis of the nominal transfer function will remain within the limits allowed under the conditions of the realization by the real elements of the tolerance set up. Deviations of the active elements parameters are not included, assuming that the frequency work area of the filter is relatively low in comparison with gain-bandwidth (GB) product of the operational amplifiers. Frequency pole and Q factor pole deviation of the second-order function, because of the final value of GB product, are compensated when determining the value of the passive elements
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
023023
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split