Pregled bibliografske jedinice broj: 297222
Compensation of coil radial offset in single-coil measurement of metal tube properties
Compensation of coil radial offset in single-coil measurement of metal tube properties // Synergy of science and technology in instrumentation and measurement / Tomasz Wolinski (ur.).
Piscataway (NJ): Institute of Electrical and Electronics Engineers (IEEE), 2007. str. a1-a4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 297222 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Compensation of coil radial offset in single-coil measurement of metal tube properties
Autori
Vasić, Darko ; Bilas, Vedran ; Ambruš, Davorin ;
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Synergy of science and technology in instrumentation and measurement
/ Tomasz Wolinski - Piscataway (NJ) : Institute of Electrical and Electronics Engineers (IEEE), 2007, A1-a4
ISBN
1-4244-0589-0
Skup
24th IEEE Instrumentation and Measurement Technology Conference
Mjesto i datum
Varšava, Poljska, 01.05.2007. - 03.05.2007
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
impedance; tube inner diameter; magnetic permeability;
Sažetak
Measurements of inner radius and electromagnetic properties (magnetic permeability and electrical conductivity) of metal, ferromagnetic tubes, such as oil-well casings, are essential in the assessment of their condition or as inputs for other measurement applications, e.g. reservoir electromagnetic evaluation through casing. In our previous work, we have shown that the inner radius and the permeability-to-conductivity ratio of the tube can be obtained by measurement of the impedance of a single coil axially centered within the tube. In this paper, we propose and experimentally verify the coil impedance model that is applicable for measurement of the tube properties when the tube and the coil axes are misaligned. Correction of the measured impedance for coil radial offset improves measurement accuracy and reduces the effect of the coil wobble.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
036-0361621-1625 - Inteligentni sustavi za mjerenje teško mjerljivih veličina (Bilas, Vedran, MZO ) ( CroRIS)
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb