Naslov
Computer-Aided Contour Lines - Some Experiences

Autori
Petrović, Svetozar ; Vučetić, Nada ; Lapaine, Miljenko ; Čolić, Krešimir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Izvornik
Third International Conference on Engineering Graphics and Descriptive Geometry (ICEGDG) : Proceedings, Vol. 2 / Slaby, Steve M. ; Stachel, Hellmuth - Beč : Technical University Vienna, 1988, 95-102

Skup
International Conference on Engineering Graphics and Descriptive Geometry (3 ; 1988)

Mjesto i datum
Beč, Austrija, 11.07.1988. - 16.07.1988

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
contour line; interpolation; matrix printer

Sažetak
The goal of the authors was rather unusual: to obtain contour lines using an equipment as simple as possible, which is at hand at every moment. In place of the common methods used on larger computers, a different approach proved to be the most acceptable: the generation of the dot image in the very resolution which will appear on the monitor or on the paper.

Izvorni jezik
Engleski

Znanstvena područja
Geodezija

POVEZANOST RADA