Pregled bibliografske jedinice broj: 294548
Poboljšanja u istovarnoj tehnologiji rasutog tereta uvođenjem novih elektroničkih komponenti na brod istovarivač
Poboljšanja u istovarnoj tehnologiji rasutog tereta uvođenjem novih elektroničkih komponenti na brod istovarivač // Electronics in Marine ELMAR 95: proceedings / 37th International Symposium
Pula, 1995. str. 203-208 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 294548 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Poboljšanja u istovarnoj tehnologiji rasutog tereta uvođenjem novih elektroničkih komponenti na brod istovarivač
(Improvement in the bulk cargo discharge technology with the introduction of new electronic components into a ship discharger)
Autori
Dundović, Čedomir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Skup
Electronics in Marine ELMAR 95: proceedings / 37th International Symposium
Mjesto i datum
Pula, Hrvatska, 18.09.1995. - 20.09.1995
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
rasuti teret; iskrcajne tehnologije; brod iskrcivač
(bulk cargo; dischare technology; ship discharger)
Sažetak
The discharger grab path should be said to be dominantly influenced by the ship design and discharge technology. On the other hand, the bunker position height on a ship discharger depends on the ship's size, and influences the grab path as well as its duty cycle. The interdependence of the ship discharger, ship's characteristics, discharge technology and discharge operation calls for a thorough analysis of a number of parameters exercising more or less influence in the duty cycle of a grab and in the total discharge efficiency. When the discharge of bulk cargo is concerned, a change in geometrical relations inevitably appears, causing eventually the dispersion of the cargo, due to the old-fashioned technical and technological characteristics of the ship discharger, bad position of the bunker and the crane operator's own estimate, and furtherly, in a long run, a fall in the depth of the sea along the wharf. With the introduction of new electronic components into a ship discharger, the reduced motion of the grab hoist rope is achieved, influencing thus the necessary accelerations and decelerations. Thus, the complete duty cycle of the grab is reduced, the discharge efficiency is increased and the dispersion of cargo that may happen between the ship and the ship discharger is prevented.
Izvorni jezik
Engleski
Znanstvena područja
Tehnologija prometa i transport
