Naslov
Influence of inhibitors in cooling emulsion upon main cutting force and corrosion of workpiece

Autori
Juraga, Ivan ; Mihoci, Kristijan ; Alar, Vesna ; Šimunović, Vinko ; Stojanović, Ivan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Eurocorr 2006 / - Maastricht : The Nederlands Corrosion Centre, 2006, 1-11

Skup
Eurocorr 2006

Mjesto i datum
Maastricht, Nizozemska, 25.10.2006. - 28.10.2006

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
corrosion; inhibitor; carbon steel; emulsion

Sažetak
Cooling emulsions (agents for cooling, rinsing and lubricating) are used during fabrication of machine parts applying particle-removing processes, but their anticorrosion action is also important. Effects of different inhibiting emulsions upon main cutting force at turning of carbon steel as well their influence upon corrosion resistance of a part are reported in the contribution. Main cutting forces are measured applying dynamometric device when inhibiting emulsions have been used, and compared with data obtained at dry machining. Efficiency of inhibitors has been evaluated applying electrochemical and corrosion tests in salt and humid atmosphere. Corrosion behavior has been monitored in atmospheric conditions and in sealed space. Results of conducted research indicate that application of inhibiting emulsions as coolants may significantly reduce cutting forces and slow down corrosion rate for tested carbon steel grade.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA