Pregled bibliografske jedinice broj: 268370
CHARACTERIZATION OF TiAlN COATINGS DEPOSITED BY SPUTTERING USING UNBALANCED MAGNETRON SOURCES AND CATHODE ARC EVAPORATION ON AISI D2 STEEL
CHARACTERIZATION OF TiAlN COATINGS DEPOSITED BY SPUTTERING USING UNBALANCED MAGNETRON SOURCES AND CATHODE ARC EVAPORATION ON AISI D2 STEEL // Trends in development of machinery and associated technology, TMT 2006 / Ekinović, Sabahudin ; Vivancos Calvet, Joan ; Yalcin, Senay (ur.).
Zenica, 2006. str. 1275-1278. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 268370 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
CHARACTERIZATION OF TiAlN COATINGS DEPOSITED BY SPUTTERING USING UNBALANCED MAGNETRON SOURCES AND CATHODE ARC EVAPORATION ON AISI D2 STEEL
Autori
Goršćak, Đurđica ; Panjan, Peter ; Ćurković, Lidija ; Čekada, Miha
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Trends in development of machinery and associated technology, TMT 2006
/ Ekinović, Sabahudin ; Vivancos Calvet, Joan ; Yalcin, Senay - Zenica, 2006, 1275-1278.
Skup
10th International Research/Expert Conference, " Trends in development of machinery and associated technology"
Mjesto i datum
Barcelona, Španjolska; Lloret de Mar, Španjolska, 11.09.2006. - 12.09.2006
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
PVD hard ceramic coatings; tool steel
Sažetak
The investigation was performed on commercially available tool steel AISI D2 of Uddeholm Company under the trade name Sverker 21, which was a substrate for applying the physical vapour deposition (PVD) TiAlN coatings. The investigated coatings were deposited by sputtering using unbalanced magnetron sources– CC800 (CemeCon) at Jozef Stefan Institute (Ljubljana, Slovenia) and cathode arc evaporation technique (BAI 1200) in Balzers (Kapfenberg, Austria). The use of hard ceramic coatings deposited by PVD onto tool steels can result in significant improvements in tool life over the uncoated materials. Several fundamental properties of the deposited coatings were investigated. The following laboratory tests were performed: microhardness measuring, nanoindetation test, scratch test, investigation of adhesion, roughness measuring. Results of scanning electron microscopy and glow discharge optical emission spectroscopy (GDOES) depth profile results are included as well.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
