Pregled bibliografske jedinice broj: 267770
Measurements of UV Radiation During NDT Inspection
Measurements of UV Radiation During NDT Inspection // 9th European Conference on NDT, Proceedings BB 103-CD
Berlin: German Society for Non-Destructive Testing (DGZfP), 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 267770 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Measurements of UV Radiation During NDT Inspection
Autori
Omelić, Miroslav ; Hrman, Danijela
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
9th European Conference on NDT, Proceedings BB 103-CD
/ - Berlin : German Society for Non-Destructive Testing (DGZfP), 2006
Skup
9th European Conference on NDT
Mjesto i datum
Berlin, Njemačka, 25.09.2006. - 29.09.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
nerazorne metode; UV zračenje; zaštita od UV zračenja
(nondestructive methods; UV radiation; protection against UV radiation)
Sažetak
Ultraviolet (UV) sources are often used during carrying out nondestructive examinations for irradiation of testing surfaces. Due to the intensity of UV sources which are used during NDT inspection it is expected that examiners can be seriously affected by even moderate exposure to UV radiation if appropriate working procedures and health and safety protection wear are not used. In accordance with valid regulations where permitted energy of UV radiation is required there is a need for intensity of radiation measurements and inspection of used UV sources. The paper will present the preliminary results of intensity measurements of radiation UV sources during the inspection as well as review of benefits and possible protection against UV radiation.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
0120046
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Danijela Hrman
(autor)