Pregled bibliografske jedinice broj: 266489
Core Degradation and Hydrogen Production During a Severe Accident
Core Degradation and Hydrogen Production During a Severe Accident // Conference Proceedings of the International Youth Nuclear Congress 2006
Stockholm: International Youth Nucler Congress, 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
CROSBI ID: 266489 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Core Degradation and Hydrogen Production During a Severe Accident
Autori
Šadek, Siniša ; Rašeta, Davor ; Keco, Mario
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), stručni
Izvornik
Conference Proceedings of the International Youth Nuclear Congress 2006
/ - Stockholm : International Youth Nucler Congress, 2006
Skup
International Youth Nuclear Congress 2006
Mjesto i datum
Stockholm, Švedska, 18.06.2006. - 23.06.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
severe accident; core degradation; hydrogen production
Sažetak
Public perception of nuclear power plants' (NPP) safety is a very important factor for the future of these plants. One of the most critical issues in public perception is the potential for the occurrence of severe accidents (SAs). Very complex physical, chemical and radiological phenomena take place during various stages of SAs. This paper will present analyses of the QUENCH-06 experiment performed in the QUENCH facility at the Karlsruhe Research Centre and a postulated station blackout (SBO) accident in NPP Krško, a two-loop Pressurized Water Reactor (PWR) plant. Both analyses were done with the RELAP5/SCDAPSIM computer code. The objective of the QUENCH-06 experiment was to investigate the hydrogen source term and the behaviour of pre-oxidized fuel rods cladding upon cooling down with water. On the other hand, the analysis of the SBO accident was focused on the SA phenomena such as reactor core heat-up, cladding oxidation and subsequent core degradation and core melt progression due to inadequate core cooling.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika