Pregled bibliografske jedinice broj: 265126
Comparison of chemical wear of standard cotton cloth after laundering using different solvents for cellulose
Comparison of chemical wear of standard cotton cloth after laundering using different solvents for cellulose // Book of Proceedings of 3rd ITCDC - Magic World of Textiles / Dragčević, Zvonko (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2006. str. 265-270 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)
CROSBI ID: 265126 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Comparison of chemical wear of standard cotton cloth after laundering using different solvents for cellulose
Autori
Fijan, Sabina ; Pušić, Tanja ; Borovnik, Anja ; Šostar-Turk, Sonja
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo
Izvornik
Book of Proceedings of 3rd ITCDC - Magic World of Textiles
/ Dragčević, Zvonko - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2006, 265-270
Skup
3rd International Textile, Clothing and Design Conference - Magic World of Textiles
Mjesto i datum
Dubrovnik, Hrvatska, 08.10.2006. - 11.10.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
chemical wear; cellulose; laundering; quality parameters
Sažetak
The objective of laundering is to return soiled textiles to a clean, hygienic and ready-for-use state with minimal damage influenced by chemical and mechanical action. Chemical wear of the cellulose in cotton cloth is caused by the action of chemical agents during the laundering process and leads to changes in the intrinsic properties of the fibres. The consequence of chemical wear is the reduction in the degree of polymerization of the cellulose constituent. In our research we investigated the influence of oxidising agents on the chemical wear of test cotton fabrics (DIN 53919) laundered in different industrial and hospital laundries. Different standard solvents for cellulose: copper tetra-amine hydroxide, copper (II) ethylene-diamine and iron (III) tartaric acid sodium complex were applied in the inter-laboratory testing. The results show that all three methods are equivalent since the results obtained are relatively comparable.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA