Pregled bibliografske jedinice broj: 263326
MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES
MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES // Trieskove a beztrieskove obrabanie dreva 2006 / Dzurenda, Ladislav ; Banski, Adrian (ur.).
Zvolen: Tehničko Sveučilište u Zvolenu (TUZ), 2006. str. 135-142 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 263326 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES
Autori
Goglia, Vlado ; Đukić, Igor
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Trieskove a beztrieskove obrabanie dreva 2006
/ Dzurenda, Ladislav ; Banski, Adrian - Zvolen : Tehničko Sveučilište u Zvolenu (TUZ), 2006, 135-142
Skup
Trieskove a beztrieskove obrabanie dreva 2006 V. Medzinarodna vedecka konferencia
Mjesto i datum
Vysoké Tatry, Slovačka, 12.10.2006. - 14.10.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
ergonomics; hand-arm transmitted vibration; antivibration gloves; protection
Sažetak
The increasing attention is paid to the protection of the mechanized working tool from the vibration. The paper presents research results of the vibration transmitted from the chain saw rear handle to the operator's hand without gloves and when five different type of antivibration gloves were used. The vibration levels were measured at idling, full load and cutting. The vibration levels were measured and analyzed and the frequency spectra for the chosen working conditions were obtained. The frequency-weighted acceleration, given in m/s^2, was calculated. The vibration total value was defined as the root-sum- of-squares of the three component values. The obtained values are graphically representing.
Izvorni jezik
Engleski
Znanstvena područja
Šumarstvo
