Pregled bibliografske jedinice broj: 262236
ALUMINIUM FOAM DRILLING
ALUMINIUM FOAM DRILLING // INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING / Cebalo, Roko ; Kopač, Janez ; Ciglar, Damir (ur.).
Zagreb, 2006. str. 159-165 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 262236 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
ALUMINIUM FOAM DRILLING
Autori
Ciglar, Damir ; Udiljak, Toma ; Škorić, Stephan ; Katić, Oliver
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING
/ Cebalo, Roko ; Kopač, Janez ; Ciglar, Damir - Zagreb, 2006, 159-165
ISBN
953-97181-7-1
Skup
INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING
Mjesto i datum
Lumbarda, Hrvatska, 28.06.2006. - 01.07.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
aluminium foam ; axial force ; drilling process
Sažetak
Aluminium foams are low density materials due to the aluminium, with high strength and rigidity as well as good damping capacity due to the cell structure. Therefore, their application in the modern lightweight structures is the object of intensive research. It is possible to join such structures by welding or by screw fastening. Paper presents the results of experimental investigation of axial forces in drilling aluminium foam on drilling parameters - feedrate per tooth and drill tip angle. Samples of aluminium foam with mean closed cell size of 0.5-1.5mm, manufactured with indirect foaming by precursors AlSi12, are used as a workpiece material. Experiments are carried out at the Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
