Pregled bibliografske jedinice broj: 258200
Testing of Elastomeric Bearings for Bridges
Testing of Elastomeric Bearings for Bridges // 23rd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics / Alena Torkova, Maria Chalupova (ur.).
Pribylina-Podbanské : Žilina: EDIS, Editing Centre, University of Žilina, Slovak Republic, 2006. str. 105-106 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 258200 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Testing of Elastomeric Bearings for Bridges
Autori
Rak, Mladenko ; Krolo, Joško ; Damjanović, Domagoj
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
23rd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics
/ Alena Torkova, Maria Chalupova - Pribylina-Podbanské : Žilina : EDIS, Editing Centre, University of Žilina, Slovak Republic, 2006, 105-106
Skup
23rd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics
Mjesto i datum
Podbanské, Slovačka, 26.09.2006. - 29.09.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
bridge; bearing; mechanical properties; displacement; stiffness; damping; shear modulus
Sažetak
The aim of these testings was to determine mechanical characteristics of elastomeric bearings for new Jankomir bridge over Sava river in Zagreb with emphasis on the characteristics in horizontal direction under vertical load. Tested bearings were roun shaped with diameter of 450 mm and total height of 111 mm type V2ES 2400/190 (thickness of elastomeric layers is 5x11=55 mm, and thickness of steel plates is 4x4+2x20=56 mm ). The manufacturer of these bearings is Polirol Zagreb. Testing was carried out in accordance with european norm prEN 1998-2: ''Bridges with seismic isolation''. Testing were carried out in the Structure testing laboratory of Civil engineering Faculty, University of Zagreb
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
