Pregled bibliografske jedinice broj: 254464
Utilization of GA for Optimization of Tool Path on a 2D Surface
Utilization of GA for Optimization of Tool Path on a 2D Surface // Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji (ur.).
Tokyo: University of Tokyo Press, 2006. str. 231-236 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 254464 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Utilization of GA for Optimization of Tool Path on a 2D Surface
Autori
Car, Zlatan ; Mikac, Tonči ; Veža, Ivica
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 6th International Workshop on Emergent Synthesis
/ Ueda, Kanji - Tokyo : University of Tokyo Press, 2006, 231-236
Skup
6th International Workshop on Emergent Synthesis
Mjesto i datum
Tokyo, Japan, 18.08.2006. - 19.08.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Genetic algorithm; machining center; 2D surface
Sažetak
Machining centers based on the milling principles are becoming more and more popular due to their ability to handle geometrically complex workpieces. Unfortunately, several physical phenomena that often affect the quality of the desired surface. The most common problem is definition of the tool-path movements which have strong influence on the kinematics and dynamics of the machining centers. To solve this problem we have proposed utilization of the GA based mostly on the geometrical parameters. From the obtain results we could conclude that here presented method is promising and future development is necessary, especially for introduction more complex technological parameters.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
