Naslov
Optimization of parameters of turning process

Autori
Bajić, Dražen ; Majce, Ivan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
International Scientific Conference on production Engineering / Cebalo, Roko ; Kopač, Janez ; Ciglar, Damir - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2006, 129-136

Skup
International Scientific Conference on production Engineering

Mjesto i datum
Lumbarda, Hrvatska, 28.06.2006. - 01.07.2006

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
longitudinal turning process; surface roughness; cutting parameters; mathematical modelling; optimization

Sažetak
The objective of this study was to investigate influence of cutting parameters on the surface roughness, during the longitudinal turning process. Detailed experiments according to the factors test plan and regression analysis, gave the extend equation for mean arithmetical roughness, as one of the most useful signs of the surface roughness. In other to get a minimum values of the surface roughness, optimization of the mathematical model is done by and optimal values of the examined factors are determined. The obtained results are, according to the experiment plan, valid for the testing of material Č5431 (DIN 34CrNiMo6). The test results are to be probably applied to other materials, however, has to be proved for each separate case.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA