Naslov
Drive System Application for Metal Strip Flatness Measurement and Control System
(Drive System Application for Metal Strip Flatness Measurement And Con-trol System)

Autori
Jelaska, Šimun ; Slutej, Alojz

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 10^th International Conference Electrical Drives and Power Electronics - EDPE '98 / - Zagreb : Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 1998, 226-229

Skup
10^th International Conference Electrical Drives and Power Electronics - EDPE '98

Mjesto i datum
Dubrovnik, Hrvatska, 14.10.1998. - 16.10.1998

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
stressometer; drive system; measuring roll; strip flatness; strip tension; force measurement

Sažetak
ABB Stressometer Flatness Measurement System is based on radial force measurement exerted on the measuring roll. The radial force is caused by the tension distribution in the cold rolled metal strip wrapped around the roll at a specified angle when the strip is under tension. The ABB Stressometer system for metal strip flatness measurement and appropriate drive system application are shortly presented.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika, Metalurgija

Napomena
This application adaptation work was made by a group of people in Force Measurement Division of ABB Industrial Systems AB in Västeras, Sweden, which have a good knowledge of the requirements imposed on the flatness measurement system installations as well as the factors influencing the flatness of the cold rolled metal strips and foils

POVEZANOST RADA