Naslov
Numerical Prediction of Airfoil Stall

Autori
Milas, Zoran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
9th International Conference on Numerical Methods in Continuum Mechanics, ISBN 80-968823-4-1 / Žmindak, M. - Žilina, 2003

Skup
9th International Conference on Numerical Methods in Continuum Mechanics (NMCM 2003)

Mjesto i datum
Žilina, Slovačka, 09.09.2003. - 12.09.2003

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
airfoil; stall; lift/drag; modeling

Sažetak
Prediction of the airfoil characteristics, particularly for large incidence angles when stall occurs, depends on the prediction of separation. Turbulent flow around NACA 0012 airfoil in the range of incidence angles from 0.0 up to stall angle at Re=2.8 106 is calculated by applying the finite volume method with modified turbulence model. A grid independent solution is achieved on the C-type grid around airfoil with 1664*320 control volumes for the finest grid in multigrid procedure. Inclusion of the laminar part by prescribing transition is required in order to bring the calculated data closer to the experimental ones. Very good agreement is obtained between the calculated and the experimental values of the lift-drag coefficients and the pressure coefficient distribution at moderate incidence angles. The peak values of the lift coefficient in the stall area are underpredicted. Trailing edge separation bubble appears at 180.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA