Pregled bibliografske jedinice broj: 247569
TLM Model for the Lightning Transient Analysis of the GSM Base Station
TLM Model for the Lightning Transient Analysis of the GSM Base Station // COST 286 Workshop : Electromagnetic Compatibility (EMC) in Diffused Communications Systems / Catrysse, Johan ; Marvin, Andy ; Roje, Vesna (ur.).
Split: Universuty of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2005. str. 11-12 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 247569 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
TLM Model for the Lightning Transient Analysis of the GSM Base Station
Autori
Vujević, Slavko ; Sarajčev, Petar ; Petrović, Jakov
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
COST 286 Workshop : Electromagnetic Compatibility (EMC) in Diffused Communications Systems
/ Catrysse, Johan ; Marvin, Andy ; Roje, Vesna - Split : Universuty of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2005, 11-12
Skup
COST 286 : Electromagnetic Compatibility (EMC) in Diffused Communications Systems
Mjesto i datum
Split, Hrvatska, 12.12.2005. - 13.12.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
EMTP; GSM base station; lightning
Sažetak
This paper presents a transmission line model (TLM) for the GSM base station lightning transient analysis, which is based on the use of the well-known ATP-EMTP software package. Direct lightning strike to the GSM base station tower is modelled with the Heidler's type of surge current source. The earthing grid and the GSM base station's tower structure by circular cross section conductors are approximated. In numerical model, conductors are subdivided into segments (1D finite elements) and Clark's model with distributed parameters is used. Because of limitations of ATP-EMTP software package, the leakage resistance of buried segments is modelled as lumped parameter. Analytical expressions for distributed and lumped segment parameters are derived using the average potential method.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
0023015
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split