Pregled bibliografske jedinice broj: 246135
Electromagnetically Coupled Rectangular Patch Antenna
Electromagnetically Coupled Rectangular Patch Antenna // Automatika, 36 (1995), 3-4; 147-151 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
CROSBI ID: 246135 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Electromagnetically Coupled Rectangular Patch Antenna
Autori
Zentner, Radovan ; Bartolić, Juraj
Izvornik
Automatika (0005-1144) 36
(1995), 3-4;
147-151
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopćenje, znanstveni
Ključne riječi
broadband matching; broadband microstrip antenna; electromagnetic coupling; line transformer; microstrip technology; rectangular patch antenna
Sažetak
A procedure for adding a parasitic patch element over a driven rectangular patch in order to achieve a greater bandwidth in microstrip antennas is considered. Extensive measurements were taken which enabled the influence of distance between a parasitic and driven patch on the input impedance locus to be determined. Both coaxial and microstrip feeds were considered. The optimum distance between parasitic and driven patch was found. A simple matching network was derived and its parameters computed for the antenna with an optimized distance between the driven and parasitic patch. The matching network consists of a line transformer of optimal length and characteristic impedance and was optimized using CAD tools. Experimental results of the influence of the matching network on input impedance locus were in good agreement with theoretical predictions. the achieved relative bandwidth gave about 30% of the voltage standing wave ratio no greater than 2.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
Citiraj ovu publikaciju:
Uključenost u ostale bibliografske baze podataka::
- The INSPEC Science Abstracts series