Pregled bibliografske jedinice broj: 245268
Modeling and Simulation of Deep Drawing Tool Geometry,
Modeling and Simulation of Deep Drawing Tool Geometry, // Proceedings of the 15th International DAAAM Symposium “ ; Intelligent Manufacturing & Globalisation-Technology-Men-Nature” ; / Branko Katalinic (ur.).
Beč: DAAAM International Vienna, 2004. str. 029-030 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 245268 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Modeling and Simulation of Deep Drawing Tool Geometry,
Autori
Barišić, Branimir ; Cukor, Goran ; Pletenac, Lidija
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 15th International DAAAM Symposium “ ; Intelligent Manufacturing & Globalisation-Technology-Men-Nature” ;
/ Branko Katalinic - Beč : DAAAM International Vienna, 2004, 029-030
Skup
15th International DAAAM Symposium “ ; Intelligent Manufacturing & Globalisation-Technology-Men-Nature” ;
Mjesto i datum
Beč, Austrija, 03.11.2004. - 06.11.2004
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Modeling; simulation; geometry; deep drawing
Sažetak
On the basis of the results of these modeling and simulation a deep drawing tool could be make and thinwalled tinplate cans (material TS 260-EN 10202) could be drawn with a minimal drawing force. The optimization criterion was to determine the minimal possible drawing force It was established that with semi tractrix shape it is possible to achieve this goal. By taking into account the lubrication , material properties and high geometrical and shape accuracy which influence the process, its modeling is therefore more complex.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Tehnički fakultet, Rijeka
