Naslov
The Stability of Ink-Jet Prints

Autori
Lozo, Branka ; Muck, Tadeja

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
DPP2005 / Erik Van Eldik - Amsterdam : Oce Technologies, 2005, 95 - 96

Skup
International Conference on Digital Production Printing ank Industrial Applications

Mjesto i datum
Amsterdam, Nizozemska, 09.05.2005. - 13.05.2005

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Ink-Jet Print; CLSM; PDA; Quadrant; Pira Wallace

Sažetak
The stability of the printed area can be observed from two different and independant points of view: physical and optical ; each of them relevant for the final use of the print. In our study we observed the influence of substrate surface on the stability of ink-jet printing. For this purpose, we chose different samples of paper (varying in quality, grammage, composition, surface treatment). The analysis of paper surface (smoothness, roughness, porosity) was first done on unprinted paper with conventional PPS method and with modern CLSM method. Also the dynamics of water penetration was measured. All the paper samples were subjected to ink-jet priniting. The samples were exposed to heat resistance test according to the ISO-11798 standard. The mechanical stability of the prints, expressed as rub-off resistance, was measured before and after the heat resistance test. Two different methods were used: Quadrant and Pira Wallace. The obtained results represent a part of a larger study on the behavior of various types of masterless printing

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA