Pregled bibliografske jedinice broj: 220030
Influence of Process Parameters on Axial Breaking Force of Parts Produced by Selective Laser Sintering Process
Influence of Process Parameters on Axial Breaking Force of Parts Produced by Selective Laser Sintering Process // Metalurgija, 44 (2005), 2; 133-136 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 220030 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of Process Parameters on Axial Breaking Force of Parts Produced by Selective Laser Sintering Process
Autori
Topčić, Adnan ; Tufekčić, Džemo ; Jurković, Milan ; Zaimović-Uzunović, Nermina ;
Izvornik
Metalurgija (0543-5846) 44
(2005), 2;
133-136
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Selective laser sintering; process parameters; axial breaking force
Sažetak
Insufficient knowledge about essence of the Selective Laser Sintering-SLS process and influence of process parameters on propereties of produced parts contraints widely usage of SLS process in production systems. One of the most significant process failures is impossibility of full-real load of the produced parts-ptototypes. Influence on process parameters is analysed in this paper (laser power and scan velocity), as well as post processing influence on value of axial breaking force of the parts produced by SLS process using material DM50-V2, on machine EOSIMT M250, producer EOS Munich, Germany.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
