Pregled bibliografske jedinice broj: 21771
Finite Element Simulation on Three-phase Fault of Synchronous Generator in D and Q Axis
Finite Element Simulation on Three-phase Fault of Synchronous Generator in D and Q Axis // Proceedings of 8th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering / Richter, K.R. (ur.).
Graz: Technische Universitaet Graz, 1998. str. 499-505 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 21771 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Finite Element Simulation on Three-phase Fault of Synchronous Generator in D and Q Axis
Autori
Šušnjić, Livio ; Štih, Željko ; Berberović, Sead
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 8th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering
/ Richter, K.R. - Graz : Technische Universitaet Graz, 1998, 499-505
Skup
8th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering
Mjesto i datum
Graz, Austrija, 21.09.1998. - 24.09.1998
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Two-dimensional non-linear simulation; short-circuits in D and Q axis; phase-bands motions; D-axes parameters
Sažetak
An application of the two-dimensional, non-linear, time stepping finite element technique to the simulation of short-circuits in D and Q axis of the synchronous generator is presented. To simulate rotor motion in the forward direction stator phase bands are moved backwards. The computed results of the magnetic vector potential, and the current waveforms are shown.
D-axis parameters are extracted from envelope of phase current. For Q-axis, sudden short-circuit phase currents waveforms distortion does not permit to use the same procedure as for D-axis.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
