Pregled bibliografske jedinice broj: 213683
Temperature Response of Thermally-Thick Plate: Modelling and Verification
Temperature Response of Thermally-Thick Plate: Modelling and Verification // Proceedings of the 9th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2005 / Ekinović, Sabahudin ; Yalcin, Senay ; Calvet, Joan Vivacos (ur.).
Zenica: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2005. str. 543-546 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 213683 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Temperature Response of Thermally-Thick Plate: Modelling and Verification
Autori
Bupić, Matko ; Koboević, Nikša
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 9th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2005
/ Ekinović, Sabahudin ; Yalcin, Senay ; Calvet, Joan Vivacos - Zenica : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2005, 543-546
Skup
International Research/Expert Conference (9 ; 2005)
Mjesto i datum
Antalya, Turska, 26.09.2005. - 30.09.2005
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
flat plate; dynamic model; simulation; verification
Sažetak
This paper develops mathematical model for the flat plate which is including temperature dynamics of the top surface on the plate TPi(t) and dynamics of the heat load through the plate Q(t), both depending on the air temperature changes Tao(t) on one side and Tai(t) on the other side of the plate. The method of system dynamics, known as Forrester's dynamics, was used for development of dynamic model. Model is based on concentrated parameters and therefore simple differential equations are used for description of the plate temperature dynamics. Powersim program is used for simulation. Evaluation of dynamic model is performed for the plate edges with different values of the Biot number. Comparison of the simulation results and analytical computation is presented in a form of a table. It is confirmed that simulation model follows trend of the temperature dynamic on the top surface of the plate. Presented model is adequate both for thermally-thick and thermally-thin plates.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Tehnologija prometa i transport