Pregled bibliografske jedinice broj: 213299
Experimental optimization of the probe for eddy-current displacement transducer
Experimental optimization of the probe for eddy-current displacement transducer // IEEE transactions on instrumentation and measurement, 42 (1993), 6; 995-1000 doi:10.1109/19.245652 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 213299 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Experimental optimization of the probe for eddy-current displacement transducer
Autori
Vyroubal, Darko ; Žele, Dražen
Izvornik
IEEE transactions on instrumentation and measurement (0018-9456) 42
(1993), 6;
995-1000
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
coils ; displacement measurement ; probes ; transducers
Sažetak
The experimental optimization of the coil for an eddy-current displacement transducer probe is presented in the paper. The coil geometry is optimized for the special design of the transducer as a meter of the real part of the probe's impedance. Measurement of the transducer's transfer function has been performed with several samples of ring-shaped coils, as well as with the flat, pancake-shaped coil and with the single-layered cylindrical coil. For the sake of comparison, measurement with the ferrite-cored coil has been included too. The measurement results clearly indicate that the optimal coil geometry is a ring with a uniform and very small cross section of the winding
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
