Naslov
Modified Dynamic Programming Method for Compensation Device Allocation

Autori
Majstrović, Goran ; Bajs, Davor ; Majstrović, Matislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the IEEE Powertech 2005, June 27-30, 2005, St.Petersburg, Russia / Nikolai Voropai - Sankt Peterburg : IEEE Power Tech, 2005, 251-256

Skup
IEEE Powertech 2005

Mjesto i datum
Sankt Peterburg, Ruska Federacija, 27.06.2005. - 30.06.2005

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
reactive power compensation; voltage profile; voltage collapse; active power loss

Sažetak
The main topic of this paper refers to reactive power compensating device allocation. By means of modified dynamic programming method, as proposed in this paper, optimal rated power and location of a compensating device are obtained in order to simultaneously satisfy voltage limit constraints, minimize active power loss and avoid voltage collapse in transmission network. In other words, it is necessary to unify all three criteria and find single optimal solution. Software package OPTLOK is developed on the basis of proposed method. At the end, an example given for the realistic transmission network of Croatia is exercised. Croatia, as well as some other South East Europe countries is expected to face serious reactive power compensation problem after the UCTE reconnection that happened recently.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA